Technical
Material |
Thickness |
Finish |
Variation |
AbrasionResistance |
Absorption |
Acid Sensitivity |
Reclaimed Hardwood Timber Mosaic |
301/8-13mm 302/8-18mm 303/8-15mm 304/10-15mm 601/8-30mm |
Matt, Smooth Texture |
High Variation |
Moderate |
Moderate |
Minimal |
Colour + Size
Pattern: |
301 |
302 |
303 |
304 |
601 |
Size: |
300x300 |
300x300 |
300x300 |
300x300 |
300x600 |
Application
Exterior Cladding |
Exterior Flooring |
Interior Walls |
Interior Floors |
Wet Areas |
Yes |
No |
Yes |
No |
Yes |
Eco
Company with Eco Technology
|
Indoor Air Quality |
Recycled Content |
Regional Material |
Recycled Packaging |
Waste Management |
Heat Island Effect |
Energy Performance |
Documents |
Certifications |
-
|
- |
100% Recycled Hardwood |
- |
- |
- |
- |
- |
- |
- |
*All claims as per manufacturers' provided information. Urban Edge Ceramics accepts no responsibility for claims and certifications.
** No information means it has not been tested, specified or supplied.
Installation
The Installation procedure below details the recommended installation steps for all Renaza mosaic wall tiles. Bella Lujo recommends that installations be undertaken by a qualified tradesperson (Tiler) or experienced home renovator.
Step 1:
Renaza mosaic tiles must be installed onto a solid surface, for example – gyprock, fibrous cement sheeting, brick, render, etc.
All surfaces must be clean and free of dirt and oil. All smooth painted surfaces should be given a quick sand to “roughen up” the surface – this will aid adhesion.
Step 2:
Set out – measure the area to confirm dimensions, determine if any Renaza Tiles will require cutting,
set your first row & check levels frequently.Start slowly – ensure the first row of tiles is level – set out the first row without adhesive and check tile patterns are uniform from one tile to the next.
Step 3:
Apply Adhesive* evenly to the back of each Renaza mosaic wall tile ensuring inclusive coverage of each individual mosaic timber piece (*we recommend that adhesive is applied to the entire surface area of the tile for maximum adhesion – adhesive can be applied with a sausage gun & then spread evenly over the tile surface area with a trowel).
Place and press each tile onto the wall until the adhesive takes hold.
Cutting Renaza Mosaic Wall Tiles:
It is recommended Renaza mosaic wall tiles are cut using a compound mitre saw or slide saw with a fine timber cutting blade.
Your Safety is Paramount – please ensure ALL necessary safety equipment (eye protection, ear plugs, dust mask, etc) is used.
Adhesive:
Construction adhesives are recommended for installation of Renaza feature tiles as detailed below and should be readily available from major DIY hardware stores (Bunnings, Masters, Mitre 10, Home Hardware, etc). Follow the application instructions of any adhesive used, as a guide, allow an application rate of approximately one litre of flexible construction adhesive per one square metre of Renaza mosaic wall tiles.